Victorian Numbered Regulations

ELECTRICITY SAFETY (EQUIPMENT EFFICIENCY) AMENDMENT REGULATIONS 2010 (SR NO 86 OF 2010) - NOTES

S.R. No. 86/2010

STATUTORY RULES 2010

S.R. No. 86/2010

Electricity Safety Act 1998

Electricity Safety (Equipment Efficiency) Amendment Regulations 2010

The Governor in Council makes the following Regulations:

Dated: 31 August 2010

Responsible Minister:
PETER BATCHELOR
Minister for Energy and Resources

MATTHEW McBEATH
Acting Clerk of the Executive Council

ENDNOTES

Endnotes

^[1] Reg. 3: S.R. No. 37/2009 as amended by S.R. No. 175/2009.

——

Table of Applied, Adopted or Incorporated Matter Required by the Subordinate Legislation Regulations 2004

Note that the following table of applied, adopted or incorporated matter is included in accordance with the requirements of regulation 5 of the Subordinate Legislation Regulations 2004.

In this table, "Principal Regulations" means the Electricity Safety (Equipment Efficiency) Regulations 2009.

Statutory Rule Provision	Title of applied, adopted or incorporated document	Matter in applied, adopted or incorporated document
Regulation 6(a) which inserts new definitions of AS/NZS 3823.1.2", "ducted airconditioner, ducted heat pump", "external power supply, fluorescent lamp ballast", "free-to-air set top box, non-ducted aircondioner", "non-ducted heat pump, refrigerating appliance", "set top box, subscription television set top box", "three-phase airconditioner or heat pump, "three- phase cage induction motor", wine storage cabinet and	Australian/New Zealand Standard, 'Performance of electrical appliances—Airconditioners and heat pumps Part 1.2: Test methods—Ducted airconditioners and air-to-air heat pumps—Testing and rating for performance (ISO 13253:1995, MOD)', published 9 February 2001 by Standards Australia and Standards New Zealand, AS/NZS 3823.1.2; and	Section 1 Clauses 3.8 and 3.9

Statutory Rule Provision	Title of applied, adopted or incorporated document	Matter in applied, adopted or incorporated document
wine storage compartment in the Principal Regulations
	Australian/New Zealand Standard, 'Performance of electrical appliances—Air conditioners and heat pumps Part 2: Energy labelling and minimum energy performance standard (MEPS) requirements', published 6 October 2009 by Standards Australia and Standards New Zealand, AS/NZS 3823.2; and	Clause 1.2
	Australian/New Zealand Standard, 'Performance of external power supplies Part 1: Test method and energy performance mark', published 10 November 2005 by Standards Australia and Standards New Zealand, AS/NZS 4665.1; and Australian/New Zealand Standard, 'Performance of external power supplies Part 2: Minimum energy performance standard (MEPS) requirements', published 10 November 2005 by Standards Australia and Standards New Zealand, AS/NZS 4665.2; and	Clause 1.3.19 Clause 1.2

Statutory Rule Provision	Title of applied, adopted or incorporated document	Matter in applied, adopted or incorporated document
	Australian/New Zealand Standard, 'Performance of electrical lighting equipment—Ballasts for fluorescent lamps Part 1: Method of measurement to determine energy consumption and performance of ballast-lamp circuits', published 5 May 2001 by Standards Australia and Standards New Zealand, AS/NZS 4783.1; and	Clause 4.2
	Australian/New Zealand Standard, 'Power consumption of audio, video and related equipment Part 2.1: Minimum energy performance standards (MEPS) requirements for digital television set-top boxes', published 21 October 2008 by Standards Australia and Standards New Zealand, AS/NZS 62087.2.1; and	Section 1.2 Clauses 1.5.3 and 1.5.4
	Australian/New Zealand Standard, 'Performance of electrical appliances—Airconditioners and heat pumps Part 1.1: Non-ducted airconditioners and heat pumps—Testing and rating for performance', published 5 August 1998 by Standards Australia and Standards New Zealand, AS/NZS 3823.1.1; and	Section 1 and clauses 3.1, 3.2

Statutory Rule Provision	Title of applied, adopted or incorporated document	Matter in applied, adopted or incorporated document
	Australian/New Zealand Standard, 'Performance of household electrical appliances—Refrigerating appliances Part 1: Energy consumption and performance', published 15 August 2007 by Standards Australia and Standards New Zealand, AS/NZS 4474.1; and Australian/New Zealand Standard, 'Performance of household electrical appliances—Refrigerating appliances Part 2: Energy labelling and minimum energy performance standard requirements', published 8 April 2009 by Standards Australia and Standards New Zealand, AS/NZS 4474.2; and Australian/New Zealand Standard, 'Rotating electrical machines—General requirements Part 5: Three-phase cage induction motors—High efficiency and minimum energy performance standards requirements', published 6 September 2004 by Standards Australia and Standards New Zealand, AS/NZS 1359.5.	Clause 1.3.16 Clause 1.2 Clauses 1.1 and 1.2

Statutory Rule Provision	Title of applied, adopted or incorporated document	Matter in applied, adopted or incorporated document
Regulation 6(c) which amends the definition of linear fluorescent lamp	Australian/New Zealand Standard, 'Double-capped fluorescent lamps—Performance specifications Part 2: Minimum Energy Performance Standard (MEPS)', published 16 April 2004 by Standards Australia and Standards New Zealand, AS/NZS 4782.2.	Clause 1.2
Regulation 6(f) which substitutes definition of registrable fluorescent lamp ballast	Australian/New Zealand Standard, 'Performance of electrical lighting equipment—Ballasts for fluorescent lamps Part 2: Energy labelling and minimum energy performance standards requirements', published 23 December 2002 by Standards Australia and Standards New Zealand, AS/NZS 4783.2.	Section 1
Regulation 6(i) which substitutes definition of single-phase commercial airconditioner or heat pump	Australian/New Zealand Standard, 'Performance of electrical appliances—Airconditioners and heat pumps Part 1.2: Test methods—Ducted airconditioners and air-to-air heat pumps—Testing and rating for performance (ISO 13253:1995, MOD)', published 9 February 2001 by Standards Australia, AS/NZS 3823.1.2; and	Section 1

Statutory Rule Provision	Title of applied, adopted or incorporated document	Matter in applied, adopted or incorporated document
	Australian/New Zealand Standard, 'Performance of electrical appliances—Airconditioners and heat pumps Part 1.1: Non-ducted airconditioners and heat pumps—Testing for rating and performance', published 5 August 1998 by Standards Australia and Standards New Zealand, AS/NZS 3823.1.1; and	Section 1
	Australian/New Zealand Standard, 'Performance of electrical appliances—Airconditioners and heat pumps Part 2: Energy labelling and minimum energy performance standard (MEPS) requirements', published 6 October 2009 by Standards Australia and Standards New Zealand, AS/NZS 3823.2.	Clause 1.2
Regulation 6(j) which substitutes definition of single-phase household airconditioner or heat pump	Australian/New Zealand Standard, 'Performance of electrical appliances—Airconditioners and heat pumps Part 1.1: Non-ducted airconditioners and heat pumps—Testing and rating for performance', published 5 August 1998 by Standards Australia and Standards New Zealand, AS/NZS 3823.1.1; and	Section 1