Victorian Numbered Regulations

ROAD SAFETY (VEHICLES) REGULATIONS 2009 (SR NO 118 OF 2009) - NOTES

S.R. No. 118/2009

__________________

STATUTORY RULES 2009

S.R. No. 118/2009

Road Safety Act 1986

Road Safety (Vehicles) Regulations 2009

The Governor in Council makes the following Regulations:

Dated: 7 October 2009

Responsible Minister:
TIM PALLAS
Minister for Roads and Ports

TOBY HALLIGAN
Clerk of the Executive Council

ENDNOTES

Endnotes

^[1] Sch. 2 cl. 148(1): S.R. No. 10/2003. Reprint No. 1 as at 23 October 2008. Reprinted to S.R. No. 65/2006.

——

Table of Applied, Adopted or Incorporated Matter Required by the Subordinate Legislation Regulations 2004

Note that the following table of applied, adopted or incorporated matter is included in accordance with the requirements of regulation 5 of the Subordinate Legislation Regulations 2004.

Statutory Rule Provision	Title of applied, adopted or incorporated document	Matter in applied, adopted or incorporated document
Definition of United Nations electronic stability control standard in regulation 5(1)	Global technical regulation No. 8 published by the United Nations Economic Commission for Europe and established in the Global Registry on 26 June 2008 [ECE/TRANS/180/Add.8], as amended by the Corrigendum established in the Global Registry on 12 November 2008 [ECE/TRANS/180/ Add.8/Corr.2]	The whole
Definition of forward-control passenger vehicle (MB) in regulation 5(1)	Vehicle Standard (Australian Design Rule - Definitions and Vehicle Categories) 2005 Compilation 3, dated 19 September 2007, published by the Commonwealth Department of Transport and Regional Services	The whole

Statutory Rule Provision	Title of applied, adopted or incorporated document	Matter in applied, adopted or incorporated document
Definition of off-road passenger vehicle (MC) in regulation 5(1)	Vehicle Standard (Australian Design Rule - Definitions and Vehicle Categories) 2005 Compilation 3, dated 19 September 2007, published by the Commonwealth Department of Transport and Regional Services	The whole
Definition of passenger car (MA) in regulation 5(1)	Vehicle Standard (Australian Design Rule - Definitions and Vehicle Categories) 2005 Compilation 3, dated 19 September 2007, published by the Commonwealth Department of Transport and Regional Services	The whole
Regulation 5 and clause 3 (definitions of 50 millimetre kingpin and 90 millimetre kingpin) and clauses 165, 166 and 167 of Schedule 2	Australian Standard AS 2175–1990 Articulated Vehicles Kingpins	The whole
Regulation 5 and clause 3 (definition of road tank vehicle) of Schedule 2	Australian Code for the Transport of Dangerous Goods by Road and Rail, seventh edition implemented by 31 December 2008	Volume 1 Division 1.1—Interpretation

Statutory Rule Provision	Title of applied, adopted or incorporated document	Matter in applied, adopted or incorporated document
Regulation 5, 21 and Part 3 of Schedule 2	Vehicle Standards Bulletin No. 6 - Heavy Vehicle Modifications and Vehicle Standards Bulletin No. 14 National Code of Practice for Light Vehicle Construction and Modifications, both published by the Commonwealth Department of Infrastructure, Transport, Regional Development and Local Government	The whole
Regulation 5 and clauses 17 and 19 of Schedule 2	Australian Design Rules for Motor Vehicle Safety and Trailers, second edition, published by the Commonwealth Department of Infrastructure, Transport, Regional Development and Local Government	The whole
Regulation 5 and clauses 18 and 20 of Schedule 2	Australian Design Rules for Motor Vehicles and Trailers, third edition, published by the Commonwealth Department of Infrastructure, Transport, Regional Development and Local Government	The whole
Regulation 5 and clauses 3 and clause 23(2)(a) of Schedule 2	Australian/New Zealand Standard AS/NZS 2596:2003: Seat belt assemblies for motor vehicles, published by jointly by Standards Australia and Standards New Zealand on 29 December 2003; and the relevant British Standard for seat belts	The whole

Statutory Rule Provision	Title of applied, adopted or incorporated document	Matter in applied, adopted or incorporated document
Regulation 5 and clause 23(2)(b) of Schedule 2	Second and third edition ADR 5	The whole
Regulation 5 and clause 23(2)(c) of Schedule 2	Second edition ADR 34; third edition ADR 5 and 34	The whole
Regulation 5 and clause 23(2)(d) of Schedule 2	Second and third edition ADR 22	The whole
Regulation 5 and clause 33(1)(b) of Schedule 2	British Standard AU200–1a:1984 Spray Reducing Devices for Heavy Goods Vehicles, published by the British Standards Institute on 13 August 1984	Parts 1 and 2
Regulation 5 and clause 41(3) of Schedule 2	Australian Standard AS 2513–1982 Electrical Connections for Trailer Vehicles	The whole
Regulation 5 and clause 41(5) of Schedule 2	Third edition ADR 63	The whole

Statutory Rule Provision	Title of applied, adopted or incorporated document	Matter in applied, adopted or incorporated document
Regulation 5 and clause 43(2) of Schedule 2	Australian Standard AS R1–1965 Safety Glass for Land Transport; Australian Standard AS R1–1968 Safety Glass for Land Transport; Australian Standard AS 2080–1977 Safety Glass for Vehicles; British Standard BS 857:1967 Specification for Safety Glass for Land Transport; British Standard BS 5282:1975 Road Vehicle Safety Glass; British Standard BS AU178:1980 Road Vehicle Safety Glass; Japanese Industrial Standard JIS R 3211–1979 Safety Glasses for Road Vehicles; American National Standard ANSI Z26.1–1980 Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highway	The whole
Regulation 5 and clause 53 of Schedule 2	Australian Standard AS 1973–1976 Retreaded Pneumatic Passenger Car and Light Truck Tyre; Australian Standard AS 1973–1985 Retreaded Pneumatic Passenger and Light Truck Tyre; Australian Standard AS 1973–1993 Pneumatic Tyres—Passenger Car, Light Truck and Truck/Bus—Retreading and Repair Processes, published by Standards Australia on 15 November 1993	The whole

Statutory Rule Provision	Title of applied, adopted or incorporated document	Matter in applied, adopted or incorporated document
Regulation 5 and clause 62(3) of Schedule 2	Australian Standard AS 1744–1975 Forms of Letters and Numerals for Road Signs, published by Standards Australia on 20 January 1975	The whole
Regulation 5 and clauses 62(7) and 117(3) of Schedule 2	Australian Standard AS 1906 Retro-reflective Materials and Devices for Road Traffic Control Purposes	Part 1
Regulation 5 and clause 116(7) of Schedule 2	Third edition ADR 6	The whole
Regulation 5 and clauses 117(1) and 117(2) of Schedule 2	Australian Standard AS 1743 - Road Signs	Image W6-3
Regulation 5 and clause 119(1) of Schedule 2	Vehicle Standards Bulletin No. 12 – Rear Marking Plates, published by the Commonwealth Department of Infrastructure, Transport, Regional Development and Local Government	The whole
Regulation 5 and clauses 136(1) and 137 of Schedule 2	Second edition ADR 35A; third edition ADR 35	The whole
Regulation 5 and clause 136(2) of Schedule 2	Third edition ADR 64	Clause 64.5.2
Regulation 5 and clause 138 of Schedule 2	Second edition ADR 38; third edition ADR 38; third edition ADR 38/01	The whole

Statutory Rule Provision	Title of applied, adopted or incorporated document	Matter in applied, adopted or incorporated document
Regulation 5 and clause 143(2) of Schedule 2	Australian Standard AS D8–1971 Hose Couplings for Use with Vacuum and Air-Pressure Braking Systems on Prime Movers, Trailers and Semi-Trailers	The whole
Regulation 5 and clause 154(1)(a) of Schedule 2	Australian Standard AS 1425 LP Gas Fuel Systems for Vehicle Engines in force as at the commencement of clause 154(1)(a)	The whole
Regulation 5 and clause 154(3)(c) of Schedule 2	Australian Standard AS 1742–1975 Manual of Uniform Traffic Control Devices, Appendix C, Class 2	Material related to class NP
Regulation 5 and clause 155 of Schedule 2	Third edition ADR 65	The whole
Regulation 5 and clauses 161, 163 and 164 of Schedule 2	Australian Standard AS 1773–1990 Articulated Vehicles—Fifth Wheel Assemblies; and Australian Standard AS 1771–1987 Installation of Fifth Wheel and Turntable Assemblies	The whole
Regulation 5 and clauses 168 and 170 of Schedule 2	Australian Standard AS 2213–1984 50mm Pin Type Couplings and Drawbar Eyes for Trailers	The whole

Statutory Rule Provision	Title of applied, adopted or incorporated document	Matter in applied, adopted or incorporated document
Regulation 5 and clause 174 of Schedule 2	ADR 8 Safety Glass; ADR 12 Glare Reduction in Field of View; ADR 14 Rear Vision Mirrors; ADR 16 Windscreen Wipers and Washers; ADRs 18 and 18A Location and Visibility of Instruments: ADRs 35 and 35A Commercial Vehicle Braking Systems	The whole
Regulation 21(3)(c)(i)	Vehicle Standards Bulletin No. 14 - National Code of Practice for Light Vehicle Construction and Modification, published by the Commonwealth Department of Infrastructure, Transport, Regional Development and Local Government	The whole
Regulation 164 and clauses 12, 32, 43 and 47 of Schedule 8, and clauses 22 and 28 of Schedule 9	"Height Clearance on Roads" published by VicRoads in January 2000	The whole
Regulation 187 and clauses 12, 32, 43 and 47 of Schedule 8	"Height Clearance on Roads" published by VicRoads in January 2000	The whole
Regulation 172 and clauses 62(7) and 117(3)(c) of Schedule 2 and clauses 9(6)(b), 14(1)(a), 53(1)(a) of Schedule 7	Australian Standard 1906 Retro-reflective Materials and Devices for Road Traffic Control Purposes	The whole